www.micropowerdirect.com micropower direct 292 page street suite d stoughton, ma 02072 usa t: (781) 344-8226 f: (781) 344-8481 e: sales@micropowerdirect.com w: www.micropowerdirect.com MDCFM-01A key features: ? 0 to 40 vdc input ? compact case ? 30 db attenuation ? -40c to +85c operation ? chassis mount option ? din rail mount option ? low cost input parameter conditions min. typ. max. units input voltage range see note 1 0.0 40.0 vdc nominal current see note 2 0.6 a dcr 600 m general parameter conditions min. typ. max. units frequency attenuation 30 db surge en 61000-4-5 criteria b; 2 kv (2 internal res.) criteria b; 4 kv (12 internal res.) environmental parameter conditions min. typ. max. units operating temperature range ambient -40 +25 +85 c storage temperature range -55 +125 c cooling free air convection humidity rh, non-condensing 95 % physical case size module see mechanical drawing (page 2) chassis (a2) mount see mechanical drawing (page 2) din (a4) mount see mechanical drawing (page 2) case material non-conductive black plastic (ul94-v0) weight module 0.53 oz (15g) chassis (a2) mount 1.24 oz (35g) din (a4) mount 1.95 oz (55g) electrical speci? cations speci cations typical @ +25?, nominal input voltage & rated output current, unless otherwise noted. speci cations subject to change without notice. encapsulated dc surge suppresion emc filter module schematic: mdcfm-1a typical connection the mdcfm-01 noise suppression modules operate with many mpd standard dc/dc converters. when connected to the input, these modules will substantially improve the ems perfor- mance of the converter. when used on the output, they will substantially reduce the converter output noise and ripple. contact the factory for more information notes: 1. the max input voltage level of the dc/dc converter must be less than the maximum speci ed input of the MDCFM-01A . 2. the max input current of the dc/dc converter must be less than the maximum speci ed nominal current of the MDCFM-01A.
micropower direct we power your success - for less! 292 page street ste d stoughton, ma 02072 ? tel: (781) 344-8226 ? fax: (781) 344-8481 ? e-mail: sales@micropowerdirect.com www.micropowerdirect.com for the chassis mount option, add suf? x ?a2? to the model number (i.e. MDCFM-01A-a2) w ww.m i cropower di rect.co m www.micropowerdirect.com mechanical dimensions mechanical dimensions: with chassis mount option (a2) pin function 1-v in 2+v in 3+v out 4-v out pin con nec tions the MDCFM-01A is available mounted on an adapter plate for mounting to a chassis or on a din rail. mechanical dimensions for these adapters are shown at right. the photo below shows a product mounted on a similar adapter. please contact the factory for more information. mechanical dimensions: with din rail option (a4) pin function 1-v in 2 no connection 3+v in 4+v out 5-v out connection is the same for a2 & a4 pin con nec tions for the din rail mount option, add suf? x ?a4? to the model number (i.e. MDCFM-01A-a4) notes: all dimensions are typical in inches (mm) tolerance x.xx = ?.02 (?.50) wire range for a2 & a4 connection is 24 - 12 awg
|
